Ubuntu 20.04 (and 19.10/20.10)

This package was also sucessfully tested on Ubuntu 19.10/20.10.

Installation

Download the purchased .deb package and install it by the following commands:

    apt-get install stockfish alsa-utils espeak
    apt-get install ./<packagename>.deb

<packagename>.deb is the name of the nocheto package, for example nocheto_3.1.0-0_amd64.deb.

Continue with the postinstall instructions.

ldd output

The ldd output shows which libraries are used by the nocheto executable. If you have a linux distribution with the same libraries installed, nocheto will probably work there too.

ldd /usr/local/bin/nocheto
        linux-vdso.so.1 (0x00007ffc743a3000)
        libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f2a5c1ef000)
        libedit.so.2 => /lib/x86_64-linux-gnu/libedit.so.2 (0x00007f2a5c1b7000)
        libcrypto.so.1.1 => /lib/x86_64-linux-gnu/libcrypto.so.1.1 (0x00007f2a5bee1000)
        libssl.so.1.1 => /lib/x86_64-linux-gnu/libssl.so.1.1 (0x00007f2a5be4e000)
        libsqlite3.so.0 => /lib/x86_64-linux-gnu/libsqlite3.so.0 (0x00007f2a5bd25000)
        libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f2a5bd02000)
        libstdc++.so.6 => /lib/x86_64-linux-gnu/libstdc++.so.6 (0x00007f2a5bb1e000)
        libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f2a5b9cf000)
        libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1 (0x00007f2a5b9b4000)
        libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f2a5b7c2000)
        /lib64/ld-linux-x86-64.so.2 (0x00007f2a5c7b8000)
        libtinfo.so.6 => /lib/x86_64-linux-gnu/libtinfo.so.6 (0x00007f2a5b792000)
        libbsd.so.0 => /lib/x86_64-linux-gnu/libbsd.so.0 (0x00007f2a5b778000)